9 Things You Must Know: Plumbing Leaks

9 Things You Must Know: Plumbing Leaks

9 Things You Must Know: Plumbing Leaks

You may not know everything about plumbing, but it’s important to understand the basics, especially what to when you have a leak. Here are 10 tips to help you when it comes to leaks.

1. Wrap your pipes in heat.

One of the most important features is exterior piping. If cold- water pipes touch the exterior portion of your home, the pipes will most likely freeze because the water is not being used and the temperature is very cold. The only time water is not going to freeze is when it’s moving. Therefore, it’s a wise idea to leave all the faucets open while you are away from your home. One of the best things you can do to solve this problem is to insulate the entire space.

2. You may not know what’s right, but you can usually spot what’s wrong.

Check in on the visible pipes in your home, just to keep up on what’s going on with them. Some homeowners don’t regularly their pipes and the next thing they know their water in their basement, damaging their valuables without any idea that there was anything wrong in the first place. You may have no idea what you’re looking at when it comes to your basement pipes, but if you see rust, buckling, or any signs of water, this will definitely give you an indication that something is wrong.

3. A stuffed sink can easily spring a leak.

Just take a peek under your kitchen sink every once in a while, to see if there are any drips. It never hurts to take a look every now and then.

4. Set back the spigot valve.

In some cases, a frost-free hose bib should be installed, especially if the pipe is going through the cement foundation. To prevent freezing, the hose bib will allow you to shut off the water closer to the inside of your home.

5. Radiators need a good level and an open valve.

One of the first things you should check is the pitch of the radiator, the radiator should always be pitched back toward the source of the stream. This way the water will condense and drain right back to the boiler.

6. A leaky water heater is a dead water heater.

One of the biggest problems is that the lining wears away and you get water dripping from the base. If you’re lucky enough you may be able to call the manufacturer and provide the model number to find that the product is under warranty. Regardless, you will need to have a new water heater installed.

7. Don’t blow a gasket — replace it.

If there is water dripping from the shower spout, most likely the cause is a defective washer or seat within its body. As long as you can isolate the water to this area, it should be an easy replacement.

8. Trace the trap leak back to the wall.

When you have a leak, it could possibly be where it connects to the wall. Which in this case you will have to disassemble the drain work.

9. Mechanical faucets never last forever.

Since a faucet is a mechanical thing, it is bound to leak. In this case, you will need to replace the fixtures.

If you have a plumbing emergency, don’t worry anymore. Call Mike’s Plumbing and Heating, for all your plumbing needs and relax, we’ll take care of it!
For tips visit our website at https://mikesplumbing.com/
For more information: http://www.diynetwork.com/…/10-things-you-must-know-plumbin…